How To Measure Trailer Axle Alignment

How To Measure Trailer Axle Alignment. You can check axle alignment by measuring from the center of the coupler back diagonally to the center of one of the wheels. On a dual axle trailer, you can also measure the axles to make sure they are aligned with each other.

Semi Trailer axle alignment tool in Spring Hill, KS Item
Semi Trailer axle alignment tool in Spring Hill, KS Item from www.purplewave.com

They should be identical or within 1/8 of an inch, give or take 1/16 of an inch. Make sure the tires are fully inflated and the trailer is packed as if you are going to travel now. If the distances deviate by more than 1/8 inch, then the rear axle is out of alignment with the front axle.

5 L579 H Alignment Procedures Figure 2:

If the distances deviate by more than 1/8 inch, then the rear axle is out of alignment with the front axle. Measuring properly to check trailer tire alignment requires parking your trailer on a flat surface. Make sure the tires are fully inflated and the trailer is packed as if you are going to travel now.

Do The Same On Both Sides Of The Trailer To Complete Your Trailer Axle Alignment Check.

You can check axle alignment by measuring from the center of the coupler back diagonally to the center of one of the wheels. If the tire does not move your trailer tires may be out of alignment. Measure and note the distance between the front wheel and rear wheel on either side of the trailer, if your trailer has a second axle.

How To Measure Trailer Axle Alignment.

They should be identical or within 1/8 of an inch, give or take 1/16 of an inch. Measure from the center of the extensions tubes. Next measure from the straightedge to the frame in back of the wheel and compare the two measurements.

Click To See Full Answer.

We've made several trips since this and the tir. How do you check a trailer axle alignment? They should be identical or within 1/8 of an inch, give or take 1/16 of an inch.

The Measurements From The Center To Each Tire On The Same Axle Should Be Within 1/8 Inch Of Each Other.

Remove your boat from the trailer to make this repair much easier. Another way to check the alignment of a dual axel trailer is to measure. Measure from the straightedge to the frame in front of the wheel and record the measurement.

Leave a Reply

Your email address will not be published.